Chapter 13 Keyframe Effects
791
Recalling a Register
Flexi Pad control block (standard type)
1
In the Flexi Pad control block, press the [EFF] button.
This assigns the Flexi Pad control block to master timeline operation.
The previously selected bank number and last recalled register number
appear in the numeric display.
2
Using any of the following methods, select the bank to be recalled.
To select bank 0: press the [BANK 0] button.
To select bank 1: press the [BANK 1] button.
To select any of banks 0 to 9: press the [BANK SEL] button; the memory
recall section display changes as shown in the following figure; press
one of 0 to 9.
EFF button Numeric display
Memory recall section
Bank selection buttons
To Next Page
Loading...
