Chapter 13 Keyframe Effects
793
Recalling a Register
Recalling a register from the Multifunction Flexi Pad control
block
1
Press the [EFF] button, turning it on.
2
Press the button corresponding to the region you want to select, turning it
on.
You can also press more than one button.
[M/E 1], [M/E 2], [M/E 3], [M/E 4], [P/P]: These select the
corresponding M/E-1, M/E-2, M/E-3, M/E-4, and PGM/PST regions.
Notes
To select M/E 4, it is necessary to assign M/E 4 to a button.
For details of the assignment, see “Assigning a Region to the Region
Selection Buttons in the Numeric Keypad Control Block or Multifunction
Flexi Pad Control Block” in Chapter 19 (Volume 3).
[USER 1] to [USER 8]: These select the User regions.
[DME 1] to [DME 8]: These select the DME channels.
[PBUS]: This selects P-Bus.
[GPI]: This selects GPI.
EFF button
Alphanumeric display
Region selection buttons
Memory recall section
To Next Page
Loading...
