Chapter 13 Keyframe Effects
836
Creating and Saving a Master Timeline
• If the operation is carried out, the region selected in step 3 is registered
on the master timeline, and the parameters are now valid.
5
Turn the knob to select the number of the effect register.
6
Repeat steps 3 to 5 as required to set all regions and register numbers to be
saved on the master timeline.
7
In the <Store> group, press [Store].
This saves the settings.
To return to the state before saving the master timeline content
In the <Store> group, press [Undo].
Knob Parameter Adjustment Setting values
3 Effect Reg Effect register number 1 to 399
To Next Page
Loading...
