Chapter 13 Keyframe Effects
845
Register Operations in the Menus
Renaming a register
(This applies to all regions.)
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the register you want to
rename.
• Press directly on the corresponding register indication in the status area.
• Turn the knob.
2
Press [Rename].
A keyboard window appears.
3
Enter a name of up to eight characters, and press [Enter].
This changes the name.
Knob Parameter Adjustment Setting values
1 Register Register selection 1 to 99
To Next Page
Loading...
