Chapter 15 Utility/Shotbox
895
Shotbox Execution
• To select a register in bank 1, press the [BANK 1] button.
• Press the [BANK SEL] button, and when the memory recall section
display changes as follows, press the button from 0 to 9 corresponding
to the bank you want to select.
• The numeric display shows the selected bank number.
• The buttons in the memory recall section show the names and states of
the registers corresponding to the selected bank.
Off: register in which nothing is saved
Lit orange: register holding shotbox settings
Lit yellow: last executed register
3
Press the button in the memory recall section corresponding to the register
you want to run.
• The selected shotbox register is executed.
• The pressed button lights yellow.
Flexi Pad control block (standard type)
Multifunction Flexi Pad control block )
To Next Page
Loading...
