Chapter 16 Macros
943
Macro Editing Using Menus
• When multiple events are selected.
• When the number of events has reached 99.
• When not in macro editing mode.
1)
1) While a macro is being executed on the control panel, when macro saving has been
executed, or when the [EXIT] button in the Flexi Pad control block or Multifunction Flexi
Pad control block has been pressed
5
Operate the control panel to save the editing result.
To delete an event
1
In the macro register listing, press [<Prev] or [>Next] to select the event
you want to delete.
To select all events in the register
Press [All].
2
Press [Delete].
This deletes the selected event.
Notes
If not in macro editing mode
1)
, [Delete] is disabled, and it is not possible
to delete the selected event.
1) While a macro is being executed on the control panel, when macro saving has been
executed, or when the [EXIT] button in the Flexi Pad control block or Multifunction Flexi
Pad control block has been pressed
3
Operate the control panel to save the editing result.
To modify an event
1
On the control panel, if auto insert mode is on, switch it off.
2
In the macro register listing, press [<Prev] or [>Next] to select the event
you want to modify.
3
On the control panel, modify the macro event.
The modified event appears in the macro creation event list.
For more details of the display, see “Macro File Editing Rules” (page
1016).
4
Press [Modify].
This modifies the event selected in the list.
To Next Page
Loading...
