Chapter 16 Macros
974
Macro Timeline
Notes
An action set for a key frame is only executed when the key frame effect is
executed in the forward direction. It is important to remember that the action is
not executed in the reverse direction when executing simultaneously with
switcher and DME key frame effects.
Forcibly ending a macro timeline
• If the timeline has completed but a macro is still executing, press the
[REWIND] or [RUN] button in the key frame control block to forcibly end
the macro timeline.
• In a macro timeline, since a take operation is not possible, if a macro included
in the timeline has a pause event with a pause time of zero, the remainder of
the timeline after the pause is ignored, and the macro timeline ends at that
point.
Register editing functions
You can use the following editing functions on a register in which a macro
timeline is stored.
•Copy
•Move
•Swap
•Merge
•Lock
•Name
• Delete
File-related functions
You can save and recall a created macro timeline as effect data, in the File
menu.
Timeline operations are carried out on a macro timeline in the same way as for
normal effects.
For details of timeline operations, see “Chapter 13 Keyframe Effects” (page
765).
Notes
When using a macro timeline, note the following.
• To use a macro timeline, the Macro region must be assigned to a region
selection button in the numeric keypad control block.
To Next Page
Loading...
