Chapter 17 Files
995
Operations on Individual Files
4
Press either of the following at the top of the list, to select the type of data
displayed.
• To display clip files, press [Clip].
• To display extended clip files, press [Ext Clip].
5
Using any of the following methods, select the files you want to convert.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
6
Carry out either of the following.
• To convert clips to extended clips, press [Clip -> Ext Clip].
• To convert extended clips to clips, press [Ext Clip ->Clip].
Creating a frame memory folder on the device (HDD or Memory
Card)
1
In the File menu, press VF5 ‘Frame Mem’ and HF2 ‘Frame Memory
Folder.’
The Frame Memory Folder menu appears. The status area shows the
device status, and a list of files present on the device.
2
In the pull-down menu of the device selection section, select [HDD] or
[Memory Card], and then specify the directory.
3
Press [New].
A keyboard window appears. (See the section “Menu Operations” in
Chapter 2 (Volume 1).)
4
Enter a name of up to eight characters, and press [Enter].
The name entered appears in the status area as a frame memory folder.
Notes
• The following names cannot be used.
Default, Flash1, Flash2
Knob Parameter Adjustment Setting values
1 List L File selection in the left list 1 and upwards
2 List R File selection in the right list 1 and upwards
3 Num Number of files selected 1 and upwards
To Next Page
Loading...
