Printer Status Temperature Status
Page 127
© Copyright 2020 Stratasys. All rights reserved.
Temperature Status
Oven Temperature
The oven’s temperature can be viewed via the Maintenance page. To locate this information:
1. Press the T
ools button within the Navigation Menu; the Tools page will be displayed.
2. Press the M
aintenance button within the Tools page; the Maintenance page will be
displayed.
3. Locate the Chamber row within the page. The printer’s current and set point oven chamber
t
emperatures are displayed within this row.
Figure 32: Maintenance Page Oven Chamber Temperature
Head Temperature
To view temperature information pertaining to the model and support heads within the
Materials page:
1. Press the M
aterials button within the Navigation Menu; the Materials page will be
displayed.
2. The Display Area of this page contains two Head Status Icons, one corresponding to the
m
odel head and the other corresponding to the support head. (See “Head Status Icons”
(page 55) for details). The head’s current temperature as compared to its set point
temperature is displayed within the lower portion of the icon.
To Next Page
Loading...
