Stratasys F120 - Material Coil Box Memory Chip

Modeling Materials Material Coil Box Memory Chip
Page 30
© Copyright 2020 Stratasys. All rights reserved.
Table 2 (page 30) lists color availability by model material type.
Material Coil Box Memory Chip
Each material coil box has a memory chip; this memory chip recognizes the box’s material type
and tracks the box’s volume. The F120 printer utilizes a different memory chip than other
Stratasys materials and as a result, only F120 printer compatible material coil boxes can be
used to build parts on the printer.
Figure 14: Material Spool Memory Chip Location
When a material coil box is connected, its memory chip is read and the box’s information is
re
ported to the printer. The material coil box’s material type and volume are displayed within
the Materials page of the User Interface (see “Working with the Materials Page” (page 54) for
more information). If a non-compatible material coil box is connected, an error will be displayed
on
the User Interface.
Table 1: Available Materials
Printer Model Available Materials
F120 ABS and ASA
Table 2: Color Options
Material Type Solid Color Options Translucent Color Options
ASA
Ivory, Black, White, Dark Gray, Light
Gray, Red, Blue, Orange, Green, Yellow
ABS
Ivory, Black, White, Dark Gray, Red, Blue,
Or
ange, Green, Yellow
Memory Chip