Working with the Tools Page Maintenance
Page 84
© Copyright 2020 Stratasys. All rights reserved.
The two directional arrow buttons within the Stage: section allow you to move the platen (Z) up
or down.
• Up: pressing the U
p Arrow button moves the Z stage to the mid-Z position.
• Down: pressing the D
own Arrow button moves the Z stage to the lower-Z position.
The information displayed within the Positions portion of the page will update to reflect X, Y,
an
d Z positioning changes made using the directional arrow buttons.
Figure 66: Gantry/Stage Page
Chamber
The Chamber row displays the current temperature as compared to the set point temperature
of the oven chamber.
Figure 67: Chamber Temperature
To Next Page
Loading...
