Stratasys Objet1000 Plus - Page 39

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-4
Launching Objet Studio
AfteryouinstallObjetStudio,alaunchicon appearsontheWindows
desktop.Opentheapplicationbydouble-clickingthisicon,orbyselecting
ObjetStudiofromtheStartmenu.
Windows
®
7
Security
Warning
DependingontheUserAccountControlsettingsinWindows
®
7,youmight
seethefollowingwarningwhenopeningObjetStudio.
Figure5-1SecurityWarning
IfyouclickYes,ObjetStudioopens.However,thiswarningmessagewill
appeareachtimeyouopentheapplication,unlessyouchangetheUser
AccountControlsettings.
Topreventthewarningmessagefromappearingagain:
1. Clickthelinkatthebottomofthesecuritywarningdialogbox(Change
whenthesenotificationsappear).
2. IntheUser Account Control Settingsscreen,movetheslidertoNever
notify.
Figure5-2ChangingtheUserAccountControlsettings
3. ClickOK.