Stratasys Objet1000 Plus - Page 40

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-5
4. Inthefollowingdialogbox,clickYes.
Figure5-3ConfirmingthechangeintheUserAccountControlsettings
Objet Studio
Interface
WhenObjetStudioopens,theTray Settingsscreenappears,showingan
emptybuildtray.
Figure5-4ObjetStudioopeningscreen
TheObjetStudiointerfaceconsistsoftwomainscreens:
•Tray Settings—forarrangingmodelsandpreparingthemforprinting.
•Job Manager—formonitoringandmanagingprintjobs.
Thisscreenisdescribedin"MonitoringandManagingPrintJobs"on
page5-75.
Eachscreeniscontrolledbymenusandiconsonitsownribbon.An
additionalribbon,Model Settings,displayscontrolsforconfiguringand
manipulatingselectedmodels.
ObjetStudioanticipatesyourworkflowbydisplayingandenablingtheoptions
relevanttoyourcurrenttask.Forexample,whenyoufirstopenObjetStudio,
theModel Settingsribbonisdisableduntilyouplaceamodelonthebuild
tray.Similarly,optionsavailablefromthestandardtoolbarmenusareenabled
ordisabledtomatchthecurrentworkflow.