Symmetricom TimeCreator 1000 User Manual

108 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Chapter 5 Provisioning
Provisioning Alarms
Retrieving Current Alarm Settings
The “show alarm threshold” command displays the set and clear alarm thresholds of
all ports.
Example
To display set and clear thresholds for all ports, enter the following:
1. Login at the User, Admin or Power-User level (see Login, on page 74).
2. Type
show alarm-threshold and press Enter.
Retrieving Current Alarms
The “show alarms” command displays all current alarms. The “show alarm-state”
command displays the state of all alarms.
Example
To display a list of all current alarms and list of the state of all alarms, enter the
following:
1. Login at the User, Admin or Power-User level (see Login, on page 74).
2. Type
show alarms and press Enter.
3. Type
show alarm-state and press Enter.
Displaying System Status
The “show status” command displays the system status information as follows:
 Summary for each DTI client port
 Summary for each DTI server port
 Active IOC module
 Standby IOC module
DCMUNLOCK
IOC DCM unlocked
PLLUNLOCK
IOC PLL unlocked
Table 5-7. TimeCreator 1000 Alarm Codes
Alarm Code Description

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English