Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 71
Chapter 5 Provisioning
This chapter describes the procedures for provisioning the TimeCreator 1000. Use
the procedures in this chapter after you have installed and powered up the
TimeCreator 1000 (see Chapter 3, Installing the TimeCreator 1000).
In This Chapter
 Establishing a Connection to the TimeCreator 1000
 Managing the User Access List
 Managing the IP Address Whitelist
 Provisioning Login Authentication
 Provisioning Services
 Provisioning the Ethernet Ports
 Setting the System Date, Time and Time Offset
 Setting the DTI Server Type
 Provisioning the Input Reference
 Provisioning the DTI Links
 Provisioning Revertive and Non-Revertive Mode
 Provisioning Root Server Recovery Mode
 Provisioning SNMP
 Provisioning an NTP Server
 Provisioning Cable Advance
 Provisioning Alarms
 Routine Operation Commands
 Saving and Restoring Provisioning Data

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English