Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 17
How to Use This Guide
Structure of This Guide
Structure of This Guide
This guide contains the following sections and appendixes:
Chapter, Title Description
Chapter 1, Overview of the
TimeCreator 1000
Provides an overview of the product, describes the major
hardware and software features, and lists the system
specifications.
Chapter 2, Engineering and
Ordering Procedures
Lists the part number and ordering procedure for all TimeCreator
1000 parts and accessories.
Chapter 3, Installing the
TimeCreator 1000
Contains procedures for unpacking and installing the system, and
for powering up the unit.
Chapter 4, General Guidelines for
using the Symmetricom
TimeCreator 1000
Provides basic information to which users can refer to ensure
proper system operation.
Chapter 5, Provisioning Describes the commands and procedures required to provision the
TimeCreator 1000 after installing the unit.
Chapter 6, Maintenance and
Troubleshooting
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Appendix A, Alarms, Events and
SNMP Traps
Lists the alarms and events and provides basic indications of the
source of the alarm.
Appendix B, Command
Descriptions and
Communications Interface
Describes the CLI command conventions, functions, and features
and the SNMP, NTP, SSH, and SFTP protocols.
Appendix C, Installing the
Two-Way GPS Antenna
Provides procedures for installing a GPS antenna and connecting
it to the TimeCreator 1000.
Appendix D, Specifications and
Factory Defaults
Lists the specifications for the TimeCreator 1000.
Appendix E, Software Licenses
Contains licensing information for third party software.
Index Provides references to individual topics within this guide.

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English