Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 79
Chapter 5 Provisioning
Provisioning Login Authentication
Delete an IP Address From the Whitelist
1. Login at the Admin level (see Login, on page 74).
2. To view the current list of IP addresses on the whitelist, type
show whitelist
and press Enter.
3. Type
set whitelist delete <ip address> and press Enter. (For example,
set whitelist delete 192.168.5.10).
4. Type
set whitelist commit and press Enter.
Set the Whitelist to Default
1. Login at the Admin level (see Login, on page 74)).
2. Type
set whitelist default and press Enter.
Provisioning Login Authentication
The authentication scheme used in the TimeCreator 1000 allows you to provision
either a RADIUS or TACACS+ server IP address and authentication key(s) for
server access. If RADIUS or TACACS+ is enabled, the system allows local login if
the server doesn't authenticate the user and the user is configured locally.
Provisioning the TC1000 for Login Authentication
RADIUS Server
To provision the TC1000 with the RADIUS server IP address and the authentication
key for server access:
1. Login at the Admin level (see Login, on page 74).
2. Type
set authentication radius address <address>[:<port#>] and
press Enter (address is the server IP address, for example 192.168.0.10, and
the port# is optional).
3. Type
set authentication radius key <key> and press Enter (key is up to
32 ASCII characters).
4. Type
set authentication radius state enable and press Enter.

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English