Symmetricom TimeCreator 1000 User Manual

250 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Services
This command displays all TimeCreator 1000 service states.
Command Syntax:
show services
Example:
tc1000>show services
Reponse:
Service States:
eia-232 - enable
telnet - enable
ssh - enable
ntp - enable
snmp - enable
syslog - enable
Remarks: Services include EIA-232, Telnet, SSH, NTP, Syslog, and SNMP.
Level : User, Power-User and Admin
Set Service
Use this command to specify the state of each service.
Command Syntax:
 To provision the state of EIA-232:
set service eia-232 {enable|disable}
 To provision the state of Telnet:
set service telnet {enable|disable}
 To provision the state of SSH:
set service ssh {enable|disable}
 To provision the state of NTP:
set service ntp {enable|disable}

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English