Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 249
Appendix B Command Descriptions and Communications Interface
CLI Commands
Set Sendconfig IOC user@host:file
This command is used to save the IOC configuration to a remote server using the
Secure Copy (SCP) protocol.
Command Syntax:
set sendconfig IOC user@host:file
Example:
To save the IOC configuration file “/home/user/ioc.bak” to a remote server at IP
address 192.168.3.86 -
set sendconfig IOC user@192.168.3.86:/home/user/ioc.bak
Related:
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English