Symmetricom TimeCreator 1000 User Manual

248 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Set Sendconfig IMC user@host:file
This command is used to save the IMC configuration to a remote server using the
Secure Copy (SCP) protocol
Command Syntax:
set sendconfig imc user@host:file
Example:
To save the IMC configuration file “/home/user/imc.bak” to a remote server at IP
address 192.168.3.86 -
set sendconfig IMC user@192.168.3.86:/home/user/imc.bak
Related:
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English