Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 217
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Inventory
This command displays the installed module inventory information: model number,
user-assigned asset number, IMC’s MAC addresses, IMC and IOC modules’ serial
numbers, IMC and IOC modules’ PCB versions, IMC and IOC modules’ FPGA
versions, IMC and IOC modules’ firmware versions.
Command Syntax:
show inventory
Example:
tc1000>show inventory
Response:
System Information:
Asset Tag - TC1000
IMC Serial # - J11590
IMC Firmware Version - 1.02.03
IMC Firmware Date - "Fri Jan 8 17:57:28 2010"
IMC FPGA Version - 40
IOC1 Serial # - Q46786
IOC1 Part # - 090-93121-01
IOC1 Hardware Version - C
IOC1 Firmware Version - 1.02.03
IOC1 FPGA Version # - 46
IOC2 Serial # - R14388
IOC2 Part # - 090-93121-02
IOC2 Hardware Version - F
IOC2 Firmware Version - 1.02.03
IOC2 FPGA Version # - 46
Ethernet 0 MAC Address - 00:b0:ae:01:25:85
Ethernet 1 MAC Address - 00:b0:ae:01:25:86
Remarks: The user can only modify the Asset number.
Related:
set inventory
Level : User, Power-User and Admin
Set Inventory
Use this command to provision the IMC module’s user-assigned asset value
information.
Command Syntax:

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English