097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 177
Appendix B Command Descriptions and Communications Interface
CLI Overview
Italics indicate variable options.
Each command listed provides the following information:
Command name
Description of command function
Operation of this command at security levels 1 through 3, with descriptions of
syntax and command functions
Remarks and comments about the command operation
Related Commands lists other commands that may affect or be affected by the
command.
Restrictions describes any special restrictions on the use or operation of the
command.
Command User Levels
The TimeCreator 1000 provides a hierarchy of CLI command user levels that permit
an increasing level of access to system parameters. This allows the system
administrator to add users who can only view but not change system parameters
and users who can view and change system parameters.
The users assigned to each security level have access options available as follows:
Level 1 - user class, with read-only rights
Level 2 - power-user class, with read-write rights
Level 3 - administrator user class, with read-write rights and can also configure
users and upgrade firmware