Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 265
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show User
This command displays all assigned users and access levels.
Command Syntax:
show user
Example:
tc1000>show user
Response:
Name - admin
Access Level - admin
Lock State - unlock
Name - bobo
Access Level - user
Lock State - unlock
Name - juan (remote)
Access Level - user
-Lock State - unlock
Related: set user
Level : Admin only
Set User
Use this command to provision the local user password and access level.
Command Syntax:
 Use this command to add a new user. The system prompts the Administrator for
username, password, password verification and level of access. A maximum of
30 users can be specified.
set user add
 Use this command to delete a user from the access list.
set user del <username>
Note: Users logged in remotely via RADIUS or TACACS+ will be
displayed as <username> (remote), rather than just <username> for
local users.

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English