Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 237
Appendix B Command Descriptions and Communications Interface
CLI Commands
show option
This command displays the option mode and key information.
Command Syntax:
show option
Example:
tc1000> show option
Response:
NTP server option disabled.
Remarks:
Level : User, Power-User and Admin
set option
This command sets the option mode and key information. The key information is
printed on the Symmetricom-issued certificate for the unit.
Command Syntax:
set option <key>
Example:
To enable the snmp option with an authentication key of “ABCDEF”,
tc1000> set option ABCDEF
Remarks:
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English