Symmetricom TimeCreator 1000 User Manual

240 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Set Recvconfig IMC user@host:file
This command is used to restore the IMC configuration from the remote server. This
is a two-step process that also requires using the
set configuration
restoreuser IMC
command.
Command Syntax:
set recvconfig IMC user@host:file
Example 1a:
To retrieve the IMC configuration file “/home/user/imc.bak” from the remote server
at IP address 192.168.3.86 -
tc1000>set recvconfig IMC
user@192.168.3.86:/home/user/imc.bak
Example 1b:
To restore the IMC configuration file that was retrieved rom the remote server -
tc1000>set configuration restoreuser IMC
Related:
Level : Power-User and Admin only
Note: Use the Secure Copy Protocol (SCP) to download the
configuration file from the remote server.

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English