Symmetricom TimeCreator 1000 User Manual

244 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Root-recovery Config
This command displays the root server recovery configuration. It shows whether the
auto recovery mode is enabled or not, a global setting; or if rapid recovery is enable
or not for each port (1 through 12).
Command Syntax:
show root-recovery config
Example:
tc1000> show root-recovery config
Response:
Root server recovery configuration:
Auto recovery mode: disabled
Port 01 rapid recovery mode: disabled
Port 02 rapid recovery mode: disabled
Port 03 rapid recovery mode: disabled
Port 04 rapid recovery mode: disabled
Port 05 rapid recovery mode: disabled
Port 06 rapid recovery mode: disabled
Port 07 rapid recovery mode: disabled
Port 08 rapid recovery mode: disabled
Port 09 rapid recovery mode: disabled
Port 10 rapid recovery mode: disabled
Port 11 rapid recovery mode: disabled
Port 12 rapid recovery mode: disabled
Related:
Level : User, Power-User and Admin

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English