097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 281
Appendix C Installing the Two-Way GPS Antenna
Making GPS Connections
terminal over two of the three threaded posts on the lightning suppressor
mounting plate, and attach the terminal to the mounting plate with two KEPS
nuts. Use the two posts that allow the least bending of the cable.
14.Connect an RG58 (060-58545-xx) cable between the lightning suppressor and
the TimeCreator 1000. See Table C-1 for specific cable lengths.
15.Install fire-stopping material in all holes opened in the roof and/or walls during
this procedure.
16.Check all connections for tightness to prevent arcing and intermittent operation.
17.Coat all exposed connectors with an electrically conductive antioxidant
compound (e.g. Kopr-Shield spray).
To Next Page
Loading...
Need help?
General
