Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 289
Appendix D Specifications and Factory Defaults
Factory Defaults
Eth0 IP state Enable Enable|Disable
Eth0 Host IP Address 10.0.0.100 Valid IPv4 Host Address
Eth0 Host Gateway Address 0.0.0.0 Valid IPv4 Gateway Address
Eth0 Host Mask 255.255.255.0 (24) 0 to 32
Eth1 IP mode Static Static|DHCP
Eth1 IP state Enable Enable|Disable
Eth1 Host IP Address 10.0.0.101 Valid IPv4 Host Address
Eth1 Host Gateway Address 0.0.0.0 Valid IPv4 Gateway Address
Eth1 Host Mask 255.255.255.0 (24) 0 to 32
Hostname TC1000 20 ASCII characters
SNMP Trap Destination IP
Address
Valid IPv4 Host Address or
SNMP Username (list) 20 ASCII Characters
SNMP Authentication Key (list) 20 ASCII Characters
SNMP Private Key (list) 20 ASCII Characters
a Minimum of 8 characters
NTP Server Key ID 1 to 65535
NTP Server Encryption Key Max of 32 ASCII Characters
NTP Peer IP or hostname Valid IPv4 Address or hostname
NTP Peer Key ID 1 to 65535
NTP Peer Encryption Key Max of 32 ASCII Characters
RADIUS Authentication Disable Enable | Disable
RADIUS Server IP Address Valid IPv4 Host Address
RADIUS Server Key Max of 32 ASCII characters
TACACS+ Authentication Disable Enable | Disable
TACACS+ Server #1 IP
Address
Valid IPv4 Host Address
TACACS+ Server key Maximum of 32 ASCII
characters
Local Alarm Log Buffer Size 100 0 to 100 kbytes
Local Event Log Buffer Size 100 0 to 100 kbytes
Table D-10. IMC and Communication Parameters (Continued)
Description Default Value Value Range

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English