Tandy 1400LT - D. 3.5 inch FDD Maintenance; D. 3.5 inch FDD MAINTENANCE; 1. Tools and Measuring Instruments

D. 3.5 inch FDD MAINTENANCE
1. Tools and Measuring Instruments
1-1 GENERAL AND SPECIAL TOOL LIST
The tools and measuring instruments for performing maintenance.
a) General Tools
Screw Driver Set
Tweezers
b) Special Tools
FDD TESTER FTS-1
FDD TEST SYSTEM (Ex. Computer System)
c) Measuring Equipment
Oscilloscope Dual Trace 20MHz
Universal Counter
Standard Disk
Read/Write Disk (recommend
SONY and MAXELL disk)
CST-1-1 (This pin is put into the hall of test point for measurement of test signal.)
d) Disks
e) Test Pin
D- 1