Tandy 1400LT - FDD Cable. Expansion Bus Cable. Modem Cable and Memory Cable; Bottom View of Base Frame

11-9. FDD Cable, Expansion Bus Cable, Modem Cable and Memory Cable
(1) Turn over the Base Frame and remove the Memory Spacer and the Memory PCB. (Figure 2-19)
(2) Remove the Expansion Bus Cable and the FDD Cable.
(3) Remove two Modem connector screws and two Memory connector screws, then remove the cables from the
Base Frame.
Connector Screw
0
I
I
Memory Spacer
Figure 2-19. Bottom View of Base Frame
2-1 I