ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
339
eth oam efss-event Configure Errored Frame Seconds Summary
Event.
see page 451
eth oam esp-event Configure Errored Symbol Period Event. see page 452
eth oam linkmonitor Configure the link monitor. see page 453
eth oam list Display the E-OAM configuration of an
interface(s).
see page 454
eth oam loopback Enable/disable E-OAM remote loopback for an
interface.
see page 455
eth oam loopback-tg Generate traffic for the E-OAM loopback. see page 456
eth oam modify Modify E-OAM configuration for an interface. see page 457
eth oam stats Display the E-OAM statistics of an interface. see page 458
eth oam varname Retrieve a variable by name from the remote
node.
see page 459
eth oam varnbr Retrieve a variable by Branch/Leaf from the
remote node.
see page 460
eth switch group delete Delete a specified port from a specified group. see page 461
eth switch group flush To set all ports to the default settings (all ports
in group 0).
see page 462
eth switch group list List all configured groups. see page 463
eth switch group move Move a specified port to a specified group. see page 464
eth switch info Display switch capabilities see page 465
eth switch mirror capture Define the specified port to be the Mirror
Capture Port.
see page 466
eth switch mirror egress Enable or disable the specified port to be a
Transmitted Port Mirroring.
see page 467
eth switch mirror ingress Enable or disable the specified port to be a
Received Port Mirroring.
see page 468
eth switch qos config Configure common qos parameters. see page 469
eth switch qos ifconfig Configure per port qos parameters. see page 470
eth switch qos list Display qos configuration. see page 471
eth switch qos weights Configure the queue weights. see page 472
eth switch shaper config Configure common ingress shaper parameters. see page 473
eth switch shaper ifconfig Configure per port shaper parameters. see page 474
eth switch shaper iflist Display shaper configuration per port. see page 475
To Next Page
Loading...
Need help?
General
