G10 Hardware Maintenance Guide 7.13.2 147
6
System Operating Specifications
Rev. 002-140228
Environmental Specifications
Table 6.3 defines the environmental specifications as outlined in GR-63-CORE, Issue 3,
March 2006 and GR-1089-CORE, Issue 6, May 2011.
REGULATORY SPECIFICATIONS
The GeoProbe G10 is fully compliant with the following Safety and Electromagnetic
Compatibility (EMC) specifications.
Safety Compliance
Table 6.4 lists the safety standards for which the GeoProbe G10 is fully compliant.
Table 6.3 - G10 Environmental Specifications
Environmental Specification/Limits
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature 70°C (158°F)
Rate of Temperature Change 30°C/hr (54°F/hr)
Relative Humidity, Operating 5% to 85%
Vibration, Operating Swept sine survey at an acceleration
amplitude of 0.1 g from 5
to 100 Hz and back to 5 Hz at a rate of 0.1 octave/minute. The
duration of this sweep is approximately 90 minutes.
Shock, Operating Tested to GR-63-CORE, Issue 4, April 2012, Zone 4
Electrostatic Discharge (ESD) Tested to ESD levels up to 15 kilovolts (kV) air discharge and up
to 8 kV co
ntact discharge without physical damage.
Acoustic Noise - Sound Pressure Sound Power Level (L
wad
): <78 dB at 27°C
Table 6.4 - G10 Safety Standards
Standard Title Date Edition Amendment
IEC60950-1 International Standard, Information Technology
Equi
pme
nt - Safety - Part 1: General
Requirements
2005 Second AM1: 2009
EN60950-1 British Standards - Information Technology
Equipme
nt - Safety - Part 1: General
Requirements
2006 N/A A11: 2009
A1: 2010
A12: 2011
CAN/CSA C22.2
No. 60950-1
Canadian Standard - Information Technology
Equipme
nt - Safety - Part 1: General
Requirements
2007 Second N/A
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
To Next Page
Loading...
Need help?
General