Tektronix GeoProbe G10 User Manual

G10 Hardware Maintenance Guide 7.13.2 19 
1
G10 Probe Overview
Rev. 002-140228
Figure 1.6 shows the rear view of the G10 media probe components (IIC200 version).
Figure 1.6 - G10 Media Probe Rear
G10 CONTROL PLANE PROBE CONFIGURATION
The G10 Control Plane probe configuration is designed for handling additional control-plane
capacity for one Mobility Management Entity (MME) or several pooled MMEs. This probe
supports capture of the protocols listed in Table 1.4.
Table 1.4 - Control Plane Probe Supported Protocols
VoIP Protocols LTE Protocols
 SIP
 MGCP
 H.323
 H.248
 DIAMETER
 DNS
 SIGTRAN
 S1AP (S1-MME)
 DIAMETER (S6a)
 GTPv2-C (S10, inter-MME)
 DNS
 SgsAP
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited

Tektronix GeoProbe G10 Specifications

General

Brand	Tektronix
Model	GeoProbe G10
Category	Accessories
Language	English