G10 Hardware Maintenance Guide 7.13.2 153
6
System Operating Specifications
Rev. 002-140228
G10 EQUIPMENT WARNING LABELS
Table 6.7 shows the warning labels found on the G10 equipment.
Table 6.7 - G10 Equipment Warning Labels
Icon Label
Caution: Risk of danger. Consult accompanying documents.
This product should be recycled and not disposed of as general waste.
(W
EEE annex IV resp.
EN50419)
Production of this equipment required
the extraction and use of natural
resources. The equipment may contain substances that could be harmful to
the environment or human health if improperly handled at the product’s end of
life. In order to avoid release of such substances into the environment and to
reduce the use of natural resources, we encourage you to recycle this product
in an appropriate system that will ensure that most of the materials are reused
or recycled appropriately. The symbol shown at left indicates that this product
complies with the European Union’s requirements according to Directive 2002/
96/EC on waste electrical and electronic equipment (WEEE Annex IV resp.
EN50419). For information about recycling options, check the Support/Service
section of the Tektronix Web site (www.tektronix.com).
If the product is not properly grounded, it may be damaged by electrostatic
d
i
scharge. Make sure that each of the system's parts contact the EMI gasket.
The system contains gaskets at the shelf and module level. The shelf is also
fitted with ESD snaps for use with conductive wrist straps. Please take care for
proper ESD protection of the operator.
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
To Next Page
Loading...
Need help?
General