G10 Hardware Maintenance Guide 7.13.2 149
6
System Operating Specifications
Rev. 002-140228
CE Mark
The CE Marking on the GeoProbe G10 indicates that it is in compliance with the European
Union’s EMC Directive, 2004/108/EC, and Low Voltage Directive 2006/95/EC.
NEBS
The G10 probe is compliant with NEBS level 3 per Bellcore GR-63-CORE and GR-1089-
CORE (DC units). Since the hardware platform is continuously evolving, updated systems are
periodically submitted for NEBS certification testing. For current certification status, contact
Tektronix Communications Customer Service Support.
ETSI Compliance
The G10 probe is compliant with the following specifications. Since the hardware platform is
continuously evolving, updated systems are periodically submitted for testing. For current
certification status, contact Tektronix Communications Customer Service Support.
ETSI EN 300 386 - Telecommunication network equipment; Electromagnetic
Compatibility (EMC)
ETSI EN 300 132-2 - Power Supply Interface to Telecommunications Equipment;
Operated by Direct Current (DC)
ETSI EN 300 019-2-1 (Storage), 2-2 (Transportation), 2-3 (weather-protected
locations, not to exceed 85% relative humidity)
ETSI EN 300 753 - Acoustic Noise
EN55024, Class A British Standards - Information Technology
Equipm
ent - Immunity Characteristics - Limits
and Method of Measurement
2010 A1: 2001
EN61326-2-1, Class A British Standards - Electrical Equip
ment for
Measurement, Control, and Laboratory Use -
EMC Requirements - Part -1: General
Requirements
2006 N/A
Table 6.5 - G10 EMC Standards (Continued)
St
anda
rd Title Date Amend.
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
To Next Page
Loading...
Need help?
General