Telit Wireless Solutions ME910G1 - Page 531

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 531 of 545 2020-04-15
AT$GPSNMUN?
Read command returns whether the unsolicited GNSS data stream is currently enabled or not,
along with the current NMEA mask configuration, in the format:
$GPSNMUN:<enable>,<GGA>,<GLL>,<GSA>,<GSV>,<RMC>,<VTG >
AT$GPSNMUN=?
Test command returns the supported range of values for parameters:
<enable>, <GGA>, <GLL>, <GSA>, <GSV>, <RMC>, <VTG>.
Set the GSA as available sentence in the unsolicited message
AT$GPSNMUN=1,0,0,1,0,0,0
OK
Turn-off the unsolicited mode
AT$GPSNMUN=0
OK
Read the current NMEA mask configuration:
AT$GPSNMUN?
$GPSNMUN: 1,0,0,1,0,0,0
OK
The unsolicited message will be:
$GPSNMUN:
$GPGSA,A,3,23,20,24,07,13,04,02,,,,,,2.4,1.6,1.8*3C