STEERING
673831-Rev A 7-19
7
Installation Notes
• Install the steering cylinder by reversing the order of
removal.
• Using information recorded during disassembly,
install rod end (13) onto steering cylinder with the
correct number of turns.
• Tighten fittings (3) to 15 lb–ft (19 N·m).
• Tighten hoses (1 and 2) to 11 lb–ft (15 N·m).
• Check hydraulic oil level. Add oil as needed.
• Start the machine and check for hydraulic leaks and
cylinder operation. Repair as necessary.
To Next Page
Loading...
