Bracket
7-48
4st 25/30 2022
6. Insert the assembly of the tilt cylinder 1, tilt rod 5, inner
tube 8, free piston 4, and O-ring into the PT unit 9.
1
Tilt Cylinder End Screw:
155 N·m (112 lb·ft ) [15.5 kgf·m]
7.
Install the tilt cylinder
1
and tighten to the specified torque.
9. With the tilt rod 5 fully extended, replenish the PT fluid to
the specified level.
8. Install the nut 0 and joint q to the tilt rod assy 5 and
tighten to the specified torque.
Joint, Nut, Tilt Rod:
35 N·m (18 lb·ft) [3.5 kgf·m]
1
9
0
q
271271
LT
271
5. Refill the PT fluid to the first level from the bottom of the tilt
cylinder installation area.
Reserve Tank Cap:
1.5 N · m (1.1 lb · ft) [0.15 kgf · m]
10. Install the cap w and tighten to the specified torque.
Recommended PT Fluid:
ATF DEXRON III
OIL
Recommended PT Fluid:
ATF DEXRON III
OIL
To Next Page
Loading...
Need help?
General
