3-25
3
4st 25/30 2022
18) Adjustment of Shift • Throttle Cable
(Remote Control Model)
1. Remove the top cowl and remove the stay cover
1
.
2. Set the control lever
2
to the neutral position.
4. Turn the shift arm
4
to the Forward (F), Neutral (N)
or Reverse (R) position, then turn it to the Neutral (N)
position after confirming the position.
3. Remove cable joint
3
.
Shift operations cannot be carried
out unless the throttle is fully closed.
Operating it unreasonably may cause
damage.
NN
R
R
F
F
To Next Page
Loading...
Need help?
General
