8
8-27
4st 25/30 2022
2) Inspection of the ISC Valve
1. Measure the resistance between the ISC valve terminals
1.
ISC Valve Resistance (Reference Value): (at 20°C)
WRї
The ISC valve operation test can be conducted
using the "Engine Shut-down Test" or "Engine
Running Test" of the diagnosis system.
5. The Fuel Control System
1) Inspection of the Injector
1. Measure the injector resistance.
Injector Resistance (Reference Value): (at 25°C)
WRї
•
This test can be conducted without removing
the part.
•
The injector operation test can be conducted
using the "Engine Shut-down Test" or "Engine
Running Test" of the diagnosis system.
To Next Page
Loading...
Need help?
General
