2-23
2
4st 25/30 2022
Functional Limit Action To Be Taken
--
--
--
--
--
--
--
--
Any opening under ambient temperature Replace if out of specified range
Less than 3 mm (0.1181 in) Replace if less than specified limit
Wear, crack or damage on tips and upper and lower surface lips Replace pump case liner and guide plate as a set.
- Replace if severely worn
- Replace if severely worn
- Replace depending on the condition.
0.4 mm (0.0157 in) Replace if more than specified limit
0.05 mm (0.0020 in) Replace if more than specified limit
- Adjust to specified range
- Adjust to specified range
1.35 mm (0.0531 in) Replace if less than specified limit
7.5 mm (0.2953 in) or less Replace depending on the condition.
- Replace depending on the condition.
0.4 mm (0.0157 in) Replace if more than specified limit
0.5 mm (0.0197 in) Replace if more than specified limit
- Replace depending on the condition.
When the lips are deteriorated, degraded or damaged, or when the
tightening margin is reduced to 0.5 mm (0.0197 in) due to wear
Replace with new part
- Replace if severely worn out
To Next Page
Loading...
Need help?
General
