4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.9 Interface Setting
4- 97
(10) LPR Setting (LPR)
This setting is LPR.
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
(11) Wireless LAN Standard Setting (WLAN STANDARD)
This setting is LPR.
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
LPR
LPR OFF
LPR setting
[POWER]
Disabled (Factory default)
[PAUSE]
LPR ON
Enabled
[PAUSE]
WLAN STANDARD
WLAN 11b/g
WLAN standard setting
[POWER]
Selected to IEEE802.11b/g (Factory default)
[PAUSE]
WLAN 11b
Selected to IEEE802.11b
[PAUSE]
WLAN 11g
Selected to IEEE802.11g
[PAUSE]
To Next Page
Loading...
Need help?
General