Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.9 Interface Setting
4- 98
(12) Overview of Wireless LAN Authentication Setting
(13) Wireless LAN Connection Mode Setting (WLAN MODE)
This setting is Wireless LAN connection mode.
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
Wireless LAN
connection mode
(WLAN MODE)
ADHOC
INFRA
Encryption
setting
(ENCRYPT)
OFF
WEP40
WEP104
WEP40
WEP104
Connection type
(WEP/WPA)
OPEN
SHARED
802.1X
WPA
WPA-PSK
WPA2
WPA2-PSK
OPEN SYSTEM
802.1X
connection type
(AUTH)
802.1X
authentication type
(SETTING)
NETWORK SYSTEM
EAP-TLS
EAP-TTLS
LEAP
PEAP
EAP-MD5
EAP-FAST
WPA,WPA2
connection type
(AUTH)
OPEN SYSTEM
NETWORK SYSTEM
EAP-TLS
EAP-TTLS
LEAP
PEAP
EAP-FAST
Authentication type
(SETTING)
WLAN MODE
CONN MODE ADHOC
Wireless LAN connection mode setting
[POWER]
Selected to Adhoc mode.
[PAUSE]
CONN MODE INFRA
Selected to Infrastructure mode. (Factory default)
[PAUSE]

Toshiba B-EP2DL Series Specifications

General

Brand	Toshiba
Model	B-EP2DL Series
Category	Printer
Language	English