4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.2 Diagnostic Test
4- 11
Item Description Value
CODE Control code AUTO: Automatic selection
ESC LF NUL: ESC LF NUL method
{ | }: { | } method
EURO CODE EURO font code Any code
AUTO HD CHK Automatic print head check for
broken dots
OFF: An automatic print head check for
broken dots is not performed.
ON: An automatic print head check for
broken dots is performed.
MAXI CODE SPEC. MaxiCode specification TYPE1: Compatible with existing
versions
TYPE2: Special specification
B-EP2 (2-inch) B-EP4 (4 inch) HEAD DIVISION Head division
AUTO1
DIV3
AUTO
AUTO1
DIV6
AUTO
HEAD ERR CHECK. Print head check for broken dots
after cover close
OFF: A print head check for broken dots
is not performed after the cover is
closed.
ON: A print head check for broken dots
is performed after the cover is
closed.
HEAD ERR PRINT Resume printing after broken dots
error
OFF: The printer does not resume
printing after a broken dots error
occurs.
ON: The printer resumes printing after a
broken dots error occurs.
FEED CHECK Feed to top of feed after cover
close
OFF: No feed is performed after the
cover is closed.
ON: A feed is performed after the cover
is closed.
B-SP MODE B-SP series compatibility mode OFF: B-SP series compatibility mode is
disabled.
ON: B-SP series compatibility mode is
enabled.
LINERLESS Linerless OFF: Linerless setting is disabled.
ON: Linerless setting is enabled.
XML XML OFF: XLM setting is disabled.
ON: XLM setting is enabled.
BEEP VOL Beep (buzzer) volume OFF
1 to 3
AUTO POWER OFF Auto power-off timing OFF
1 to 300min.
SLEEP Power save mode timing 1 to 30sec
LCD LIGHT OFF LCD backlight off timing OFF
1 to 30sec
EXT CHR AREA Writable character storage area
size
BASIC AREA BASIC file storage area size
PC SAVE AREA PC save area size
FORM AREA Form storage area size
GRAPHIC AREA Graphic storage area size
0KB to 895KB
(in units of 64 KB)
Depends on DBCS
installed.
0000000000 to 9999999999 FORM VER. LABEL form version number
display
0000000000 to 9999999999
To Next Page
Loading...
Need help?
General