Program *17 DDI Intercept Port Number (Vacant or Wrong Number)
System & Station
Strata DK40 Programming Manual Spring 1999
3-43
Program *17
DDI Intercept Port Number (Vacant or Wrong
Number)
Program Type:
System
Initialised Default:
No data
3
Program *17 Overview
DDI calls in which callers have dialled a vacant or unallocated DDI telephone number can
be routed to intercept ports assigned with this program. Each DDI Channel can have its own
intercept port. This program only applies to the channels that have been set up for DDI
working. It will only route callers who have dialled in on a DDI telephone number that falls
within the range issued by the service provider, but have had no destination station allocated.
(QWHU 3URJ 0RGH 0 6SNU
*
4:+ROG 0 6SNU & +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor Type DDI Line Range Intercept Port Range
DK40 001~012 000~027
DDI LIne Number Intercept Port Number
012
011
010
009
008
007
006
005
004
003
002
001
SELECT =
DDI
Line Number HUNT TO = Enter Intercept Station Logical Port No.
LED Button 01 enters blanks.
To Next Page
Loading...
