Toll Restriction
Strata DK40 Programming Manual Spring 1999
4-3
Completing the Toll Restriction System Record
The following instructions explain how to complete System Record Sheets used to program
the Toll Restriction feature. They are arranged in the same order that they appear in the Toll
Restriction System Record Sheets. The following instructions are intended to give a concise
general definition of the programming characteristics defined by each record sheet.
Note
1. On each record sheet, mark an X in the space provided to indicate that a choice is
selected. Unless otherwise specified, this indicates the LED is lit. When appropriate,
indicate digits to be entered using the station dialpad.
2. Initialised data and considerations are documented when applicable.
To Next Page
Loading...
