Toshiba Strata DK40 - Program 78 Exchange Line Special Ringing Assignments

System & Station Program 78 Exchange Line Special Ringing Assignments
3-176
Strata DK40 Programming Manual Spring 1999
Program 78
Exchange Line Special Ringing Assignments
Program Type:
Station
Initialised Default:
All LED’s are OFF
1
IMDU requires PIOU or PIOUS. See Programs 77-1 LED 14. Only one built-in maintenance modem, IMDU will
function at a time in DK40.
2
If Exchange Lines should ring telephones before the Auto Attendant answers, use Program 81~89 to assign telephones
to ring. Do not assign telephones in Program 81~89, if the Auto Attendant should answer on the first ring.
(QWHU 3URJ 0RGH 0 6SNU :;+ROG 0 6SNU +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor Exchange Line Range
DK40 001~012
Feature
Number Code
Feature
Description
Line 001 002 003 004 005 006 007 008 009 010 011 012
LED 010203040506070809101112
1
3
Ring Over External Page
during NIGHT mode
2
1
DISA Exchange Line
during DAY Mode
2
DISA Exchange Line
during DAY2 Mode
3
DISA Exchange Line
during NIGHT Mode
5
1
Ring IMDU
1
Modem
during DAY Mode
2
Ring IMDU
1
Modem
during DAY2 Mode
3
Ring IMDU
1
Modem
during Night Mode
6
1
Auto Attendant during DAY
Mode
2
2
Auto Attendant during
DAY2 Mode
2
3
Auto Attendant during
Night Mode
2
Exchange Line
Specify Exchange lines with LED Buttons as defined by the
table below. All LED’s with an X should be lit when finished.
Press
6FUROO
to advance or
3 DJH
to go back.
After programming, press:
Press
9RO
▲
to turn all LED’s ON
Press
9RO
▼
to turn all LED’s OFF
0RGH
+ Exchange line number +
&
to display and advance
Feature Number 1, 2, 5, or 6
Code 1~3