Toshiba Strata DK40 - Program 61-41 Fault Test Message 1

System & Station Program 61-41 Fault Test Message 1
3-114
Strata DK40 Programming Manual Spring 1999
Program 61-41
Fault Test Message 1
Program Type:
System
Initialised Default:
Initialised Data is Blank
Program 61-41 Overview
This program is for entering the message that will be the first line of the Fault Report (maximum 16
characters). The imput of characters uses the same method of entry as Program 93.
Program 61-42
Fault Test Message 2
Program Type:
System
Initialised Default:
Initialised Data is Blank
Program 61-42 Overview
This program is for entering the message that will be the second line of the Fault Report
(maximum 16 characters). The imput of characters uses the same method of entry as Program
93.
(QWHU 3URJ 0RGH 0 6SNU 94+ROG 0 6SNU 74 +ROG 0 6S NU & & +ROG 0 6SNU & & +ROG
(QWHU 3URJ 0RGH 0 6SNU 94+ROG 0 6SNU 75 +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
DATA = 16 Characters
DATA =
DATA = 16 Characters
DATA =