Toshiba Strata DK40 - Program 91-2 Data Transfer from Temporary Memory to Working Memory; Program 91-2 Overview

Initialisation & Test Program 91-2 Data Transfer from Temporary Memory to Working Memory
2-8
Strata DK40 Programming Manual Spring 1999
Program 91-2
Data Transfer from Temporary Memory to Working
Memory
Program Type:
Initialisation
Initialised Default:
See individual programs
Program 91-2 Overview
Program 91-2 simulates turning system power OFF for five seconds then ON to transfer data
from temporary memory to working memory.
This power OFF / power ON sequence is required when programming with a telephone or
when using DK Admin. In these cases Program 03 data must be transferred from temporary
to working memory.
Program 91-2 does not change or erase any programmed data including directory numbers set
in Program 04 and or logical/physical port assignments in Program 01 and 02.
CAUTION!
Running Program 91-2 drops all calls and renders the system inoperative
for up to eight seconds.
(QWHU 3URJ 0 R GH 0 6SNU <4+ROG 0 6SNU 5 36 37 +ROG 0 Program Telephone Exits Program Mode and Transfers Data
Enter programming mode.
(Do not press [DN] button.)
Press LED Buttons 03 and 04.
LEDs 03 and 04 must be ON.
LCD Displays:91 SELECT = 2
Programming
Taking Effect