Overview for Programs 51~54
Least Cost Routing
Strata DK40 Programming Manual Spring 1999
5-13
Overview for Programs 51~54
These programs provide the system with directions for routing all possible calls, made by all
possible users at all possible times of day. Tables for Programs 51~54 appear on LCR Route
Plan Numbers 1~8. The following instructions show how to fill in individual tables within the
plans. Each of the following program tables must be completed for all plans.
Programs 51~54 defines LCR route plans (quantities given below):
These separate plans provide the customer flexibility enough to route different STD/
International codes over different line groups.
Program 51
LCR Local/STD/International Codes Route Plan
Assignment Plans 01~08
Program Type:
Least Cost Routing
Initialised Default:
Initialised Data leaves Tables 01-07 Blank; all codes (0000~9999)
are initialised in Table 08. The system automatically assigns the
leading ‘0’
Processor LCR Route Plans
DK40 8
(QWHU 3URJ 0RGH 0 6SNU 84+R OG 0 6SNU +ROG 0 6SNU & & +R OG 0 6SNU & & +ROG
Processor LCR Plan Number LCR Plan Default
DK40 01~08 08
DATA = INT/STD Code(s)
Enter or display INT/STD codes
(The leading ‘0’ must always be
SELECT = LCR
Plan Number (01 ~ 08)
Action Code:
Enter 2 to add code to table.
Enter 3 to delete code from table.
Enter 4# to display codes in table.
To Next Page
Loading...
